How do you calculate the lithium battery capacity needed for a machine?

To calculate the lithium battery capacity needed for a machine, multiply the machine’s average current draw (in amperes) by the required runtime (in hours) to get the ampere-hours (Ah) needed, then multiply by the system voltage to get watt-hours (Wh). This core calculation gives you the baseline energy requirement, which you then adjust for real-world factors like usable capacity, temperature, and discharge efficiency. The sections below walk through each step and variable in detail.

What factors determine how much battery capacity a machine needs?

The battery capacity a machine needs is determined by four core factors: the machine’s power consumption, the required runtime per shift or cycle, the operating voltage of the system, and the conditions under which the machine operates. Together, these variables define the total energy the battery must deliver before recharging.

Beyond the basics, several application-specific factors shape the final sizing decision:

  • Duty cycle: How intensively the machine operates during a shift. A machine running at full load continuously demands far more capacity than one with frequent idle periods.
  • Depth of discharge (DoD): Lithium batteries should not be fully depleted in every cycle. The usable capacity is typically a percentage of the rated capacity, so the battery must be sized larger than the bare minimum.
  • Opportunity charging: Machines that can charge during breaks may need less total capacity than those that must complete a full shift on a single charge.
  • Temperature: Cold environments reduce effective capacity, so machines operating outdoors or in refrigerated spaces require additional buffer.
  • Safety margin: A reserve of 10 to 20% above the calculated requirement is standard practice to protect battery health and ensure the machine completes its task reliably.

For industrial machines such as forklifts, floor scrubbers, or electric work vehicles, the duty cycle and shift length are usually the dominant factors. For mobile machines or robots with variable loads, peak current demand and average consumption both need to be assessed.

How do you calculate the watt-hours needed for a machine?

To calculate the watt-hours (Wh) needed for a machine, multiply the machine’s average power consumption in watts by the required runtime in hours. The formula is: Wh = W × hours. If you know the current draw and voltage rather than watts, use: Wh = V × A × hours.

Here is a practical example. A machine draws an average of 30 amperes at 48 volts and must run for 6 hours per shift:

  1. Power in watts: 48 V × 30 A = 1,440 W
  2. Energy required: 1,440 W × 6 hours = 8,640 Wh (or 8.64 kWh)

This is the gross energy requirement. In practice, you need to account for system inefficiencies, including losses in the inverter, motor controller, and wiring. A realistic efficiency factor of 85 to 90% is common, meaning the battery must supply slightly more than the calculated figure. Dividing 8,640 Wh by 0.90 gives a corrected requirement of approximately 9,600 Wh.

If the machine’s load varies significantly (for example, heavy lifting followed by light travel), it is more accurate to break the duty cycle into segments, calculate the Wh for each segment separately, and sum them. This segment-by-segment approach avoids both undersizing and unnecessary oversizing of the battery pack.

How do you convert watt-hours to amp-hours for a lithium battery?

To convert watt-hours to amp-hours for a lithium battery, divide the total watt-hours by the battery’s nominal voltage: Ah = Wh ÷ V. This gives the rated capacity in amp-hours, which is the standard unit used on battery specifications and data sheets.

Using the example from the previous section, a requirement of 9,600 Wh at a system voltage of 48 V gives:

9,600 Wh ÷ 48 V = 200 Ah

This means you need a 48 V lithium battery with a rated capacity of at least 200 Ah before any additional derating for usable capacity or temperature. Battery capacity is always tied to a specific voltage, so comparing Ah values only makes sense when the voltage is the same. A 200 Ah battery at 24 V stores half the energy of a 200 Ah battery at 48 V.

It is also worth noting that lithium battery capacity is typically rated at a specific discharge rate, commonly C1 or C5 (full discharge in one or five hours). If your machine discharges the battery faster than the rated C-rate, the effective capacity may be slightly lower. For most industrial machine applications, the discharge rate falls within the rated range, so this adjustment is minor, but it is worth confirming with the battery specification sheet.

What’s the difference between nominal capacity and usable capacity in lithium batteries?

Nominal capacity is the total rated energy a lithium battery can store, expressed in Ah or Wh. Usable capacity is the portion of that energy you can actually draw in regular operation without damaging the battery or reducing its lifespan. For lithium batteries, usable capacity is typically 80 to 90% of the nominal rating, depending on the chemistry and application.

This distinction matters significantly for machine battery sizing. If you size a battery to exactly meet your calculated energy requirement using nominal capacity, the machine will regularly draw the battery down to near-zero, which accelerates cell degradation and shortens the battery’s service life.

Why usable capacity varies by chemistry

Lithium Iron Phosphate (LFP) batteries are particularly well suited to deep cycling. Their high thermal and chemical stability means they can tolerate deeper discharge cycles without the same degradation risk seen in other lithium chemistries. LFP batteries used in machine applications are often sized for 80 to 90% DoD, giving a usable capacity of 80 to 90% of nominal. Other lithium chemistries, such as NMC, may be limited to shallower discharge depths to preserve cycle life.

How to apply this in your calculation

Once you have your required Ah figure, divide it by the usable capacity percentage to get the minimum nominal capacity the battery must have. Using the earlier example of 200 Ah required, and assuming 85% usable capacity:

200 Ah ÷ 0.85 = approximately 235 Ah nominal capacity

This is the minimum rated capacity the battery pack should carry. Rounding up to the next standard battery size adds an additional practical buffer.

How does temperature affect lithium battery capacity in machines?

Temperature directly reduces the effective capacity of a lithium battery. At low temperatures, the chemical reactions inside the cells slow down, meaning the battery delivers less usable energy than its rated capacity suggests. At very high temperatures, capacity may increase slightly in the short term, but long-term degradation accelerates. For machines operating in cold environments, capacity losses of 15 to 25% at 0°C compared to 25°C are realistic.

This has a direct impact on machine battery sizing. A machine operating in a cold storage facility or outdoors in winter must have its battery sized with a temperature derating factor applied. If the calculated requirement is 235 Ah at 25°C and the machine regularly operates at 0°C, applying a 20% derating means the battery should be rated for at least 235 Ah ÷ 0.80 = approximately 295 Ah.

Modern lithium battery systems for machine applications often include integrated thermal management (either passive insulation or active heating and cooling) to keep cells within their optimal operating range. Intercel’s lithium battery systems for machine electrification incorporate thermal management as standard, which reduces the temperature derating needed and improves year-round performance consistency. When a battery system includes effective thermal management, the temperature correction factor can often be reduced or eliminated from the sizing calculation.

When should a machine’s battery capacity be recalculated?

A machine’s battery capacity should be recalculated whenever the machine’s load profile, operating schedule, or working environment changes significantly. Recalculation is also warranted when the existing battery no longer delivers the required runtime, when the machine is upgraded with additional electrical loads, or when the battery has aged and its effective capacity has declined noticeably.

Specific triggers for recalculation include:

  • Load changes: Adding new electrical systems, sensors, actuators, or accessories increases the machine’s average current draw.
  • Shift extension: If the machine must now operate for longer periods between charges, the original sizing may no longer be sufficient.
  • New operating environment: Moving a machine to a colder site or a more demanding duty cycle changes the energy requirement.
  • Battery aging: Lithium batteries lose a portion of their capacity over hundreds of charge cycles. When a battery’s effective capacity drops below roughly 80% of its original rating, it is typically considered end-of-life for demanding applications.
  • Opportunity charging changes: If charging windows during the shift are removed or shortened, the battery must carry more energy through the full operating period.

Recalculating capacity proactively, rather than waiting for the machine to fail mid-shift, prevents unplanned downtime and protects both the battery and the machine’s productivity. A well-maintained log of runtime, charge cycles, and any changes to the machine’s configuration makes recalculation straightforward and accurate.

Intercel’s approach to machine battery sizing: from calculation to complete solution

Getting the capacity calculation right is the foundation of a reliable machine battery, but translating that calculation into a working battery system requires deep application knowledge and engineering experience. At Intercel, we support businesses at every step of this process, from the initial sizing calculation through to delivering a complete, compliant battery solution.

  • Application-specific sizing support: We work directly with engineers and procurement teams to assess load profiles, duty cycles, voltage requirements, and operating conditions before recommending a capacity.
  • Custom battery pack design: For machines where standard batteries do not fit the physical or electrical requirements, we design and manufacture custom lithium battery packs, including LFP systems with integrated BMS, thermal management, and IoT communication.
  • Broad product portfolio: We supply high-quality lithium batteries across a wide range of capacities and voltages, including our own in-house brands such as Cellpower and Move, suited to applications from mobile cleaning machines to heavy-duty construction equipment.
  • Compliance and safety built in: Every solution we deliver meets European regulatory requirements, including cell safety, thermal runaway prevention, and functional safety standards, eliminating compliance risk after tooling.
  • Long-term partnership: We help clients monitor battery performance over time and advise on when recalculation or replacement is needed, protecting both uptime and total cost of ownership.

Whether you need help sizing a battery for a single machine or designing a complete electrification solution for a fleet, our specialists are ready to assist. Contact our team to discuss your machine’s energy requirements and find the right lithium battery solution.

Also interesting

  • Intercel Smart Batteries App for our Lithium battery series

    On track for February 2027 Battery Passport deadline

    From 18 February 2027, industrial batteries with a capacity above 2 kWh placed on the EU market must have a Digital Battery Passport under the EU Battery…

  • 2,200 km from Denmark to Italy in an electric wheelchair

    This week, Danish adventurer Anders Lehmann began an extraordinary journey of more than 2,200 kilometres from Copenhagen to Tellaro, Italy. Travelling in a specially adapted electric wheelchair…

  • Intercel Italia Srl.

    Intercel Italia Srl is open for business

    𝗔𝗻𝗼𝘁𝗵𝗲𝗿 𝘀𝘁𝗲𝗽 𝘁𝗼𝘄𝗮𝗿𝗱𝘀 𝗯𝗲𝗰𝗼𝗺𝗶𝗻𝗴 𝘁𝗵𝗲 𝘁𝗿𝘂𝘀𝘁𝗲𝗱 𝗯𝗮𝘁𝘁𝗲𝗿𝘆 𝗽𝗮𝗿𝘁𝗻𝗲𝗿 𝗶𝗻 𝗘𝘂𝗿𝗼𝗽𝗲 This week our CFO Pieter van der Bent was in Milan to sign all official documents, marking…